A Closer Look at Nano Energiser … How does It help to Restore Engines?
The nano technology product Nano Energiser is ideal for vehicles with internal combustion engines. This oil additive helps to restore engines by adding a ceramic coating of worn-out surfaces of engine parts. The resulting effects are restored engine power, fuel savings, less noise and vibration. And as an overall benefit, results in reduced harmful emissions.
All moving parts in an operational engine such as piston movement inside cylinders of an engine experience wear and tear over the lifetime of the engine. The resulting friction and corrosion of continued operation causes scratches, scores, pits, and other imperfections on the cylinder walls during the engine life. These conditions on the engine cylinders cause engine performance degradation. This is evident in reduced power output, increased fuel consumption. Oil burning, increased noise and vibration resulting in increased air pollution.
The Nano Energiser 30 ml product is suitable for any engine which works on 4 – 10 liters of oil. Simply add the suspension to the engine oil through the oil filler port when the engine is warmed up.
Bigger vehicles, like trucks, coaches, and other types of big engines which work on 11 – 25 liters of oil can use this product in bigger quantities, i.e. 2 sachets instead of 1.
The beauty of this solution is that there is no need to disassemble the engine to apply the coating. This is achieved during normal operation of the engine. This makes this a highly efficient and cost-effective solution with all the added benefits of engine restoration.
How soon will this Oil Additive work?
Ceramic coating i.e. Zirconium Dioxide also called Zirconia seems to be the most appropriate ceramic material engine metal surface coating. One of the reasons is that it has a lower thermal conductivity than other ceramic materials. The melting point of Zirconia is 2700 °C which is higher than the working temperature of any working engine. With Nano Energiser, the nano sized Zirconia powder is coated in a nano coating of platinum and emulsified in mineral oil. This gives extra stickiness, so the cracks get filled in by this inorganic technology.
Nano Energiser is brought by piston movement to all working surfaces of the engine during its operation. As a result of the heat generated during normal operation of the engine, the ceramic powder attached to the engine surface is gradually cured. When the ceramic coating is completely cured, it will form a hard and smooth surface on the working components of the engine. As the nano ceramic powders are in liquid form, it is brought to any working surface including cylinder walls, piston rings, piston top, valve tops, bearing surfaces etc.
It can take time to work, and therefore you need to drive or use the engine for some time i.e. 750 miles (1205 km) to notice the impact. It is essential that you follow the instructions carefully, and try the product for 100 days so that you drive sufficient distance to give the treatment time to work its magic. For this reason, we offer our 100 day, no quibble, money-back guarantee. If you’re not entirely satisfied after 100 days, we’ll give you a full refund.
How long will it last?
Once applied, the benefits last for up to 25 000 miles (40 200 km) of driving, so absolutely worth applying.
How do I use it?
For best results, change the oil before applying our product, or apply it after a service.
- Warm up the engine.
- Shake the sachet vigorously/10 times.
- Open the oil cap and check the dipstick to make sure there’s room in the reservoir to take the 30ml treatment.
- Pour the contents of the sachet into the oil reservoir.
- Replace the cap and turn off the engine.
Watch this video for a demonstration
- As a gearbox oil additive, use in gearbox as it lubricates to smooth gear changes.
- Use in power steering as it lubricates to produce smoother action and restored power.